Contact Us










 

 

 Sprinkler Valves

BFPE carries the best variety of valves from a wide assortment of products to meet all of your needs. If you don't see it here, ask us. We can probably get it. Shop the entire market in one place. BFPE has service, inspection, maintenance, engineering and a hand picked large selection of the best companies in the industry all in one company. 

General Purpose Valves

The following general purpose valves are for use in fire protection service applications where it is necessary to prevent reverse flow, or where system shut-off or sectional control is desired for closing a fire protection system after operation or to facilitate testing. Also, there are valves for reducing high pressures for both sprinkler piping and hose stations.

  • F512 Wafer Check Valve
  • F514 Swing Check Valve
  • F52/F520/F5201 Check Valves
  • 7800FP Grooved End Check Valves
  • 7700 FP Grooved End Butterfly Valves
  • 7700 HFP Grooved End Butterfly Valves
  • BB-SC501 and BB-SC100 Butterfly Valves

Specialty Items

Specialty items may be used in conjunction with other products in this catalog to help provide the functions necessary to meet the requirements of a properly designed fire protection system.

  • Model A Strainer
  • Model C Strainer
  • Model B-1 Pipe Line Strainer
  • F789 Automatic Drain Valve
  • F350 Sectional Test and Drain

FireLock Devices by Vitaulic

FireLock Couplings & Fittings

These devices are the most revolutionary on the market today. Lighter and more compact than competitive devices, the line of FireLock fire protection valves delivers a new level of innovation and sophistication. Our line of dry, deluge and preaction valves are designed to automatically reset after the water supply valve has been closed and the system drained. FireLock devices offer higher pressure capabilities, reduced trim, and easy in-line service. All these valves are rated to 300 PSI (2065 kPa) and are hydrostatically tested to 600 PSI (4100 kPa) before leaving the factory.


Valves

Pressure Regulating Valves
Hose Valves
Ball Valves, Caps, Flanges & Check Valves

Connections

Application
Flush Inlets
Storz Connections
Wall Plates
Exposed Inlets
Free Standing Inlets
Outlet Connections
Hydrant Controls
Pump Test & Variations
Roof Outlets
Accessories

VALVES by Reliable

LDX "Lo-Pressure" 4" and 6" Dry Pipe Systems 
(FM Approved, UL, cUL Listed!)
  1. Requires only 10-22 PSI air pressure.  Allows larger system volume.
  2. Provides faster water delivery times.  May use nitrogen in lieu of air compressor.
  3. May eliminate the need for an accelerator.  External reset.  Preassembled, segmented trim.
Easy Riser™ Swing Check Valve

Easy Riser Swing Check Valve

Viking's ductile iron Easy Riser™ Check Valve is easily installed and maintained. It can be used with a waterflow indicator and electric alarm in systems that don't require a mechanical alarm. The Easy Riser™ serves as an economical check valve in Viking Preaction and Firecycle® systems, and is available in flange/flange, flange/groove, and groove/groove models.


Viking Alarm, Easy Riser™, and Swing Check Valves feature a Clapper Assembly that is hinged to the hand-hole cover. The entire assembly can be removed for fast and easy maintenance, without removing the valve from the riser.

Model F-1 Dry Pipe Valve

The Model F-1 Dry Pipe Valve is designed with the traditional labor-saving features of the Model E-1, enhanced by the redesign of the accelerator/anti-flood trim to provide for the most cost effective dry valve package available to the fire sprinkler industry. The Model F-1 ductile iron body design has allowed Viking to reduce the size and weight without sacrificing its unique labor-saving benefits. The standard trim package incorporates fewer components and its physical dimensions are the smallest of any dry valve available. This enables the valve and trim assembly to be installed using less space and time, saving labor on each installation.

 
 

Model J Alarm Valve

The Viking Model J Alarm Check Valve is the only one of its kind made of ductile iron—a material with higher thermal shock resistance and almost twice the strength-to-weight ratio of cast or gray iron. The Model J also provides unsurpassed versatility—it can be mounted horizontally or vertically, and is available in flange/flange, flange/groove, and groove/groove models.

 

Viking Alarm, Easy Riser™, and Swing Check Valves feature a Clapper Assembly that is hinged to the hand-hole cover. The entire assembly can be removed for fast and easy maintenance, without removing the valve from the riser.

 

Swing Check Valve

Viking Swing Check Valves are stronger, yet smaller and lighter than conventional check valves. They are suitable for use in fire department pumper connections, fire pump discharge and bypass connections, public water supply connections, and gravity and pressure tank connections. They are available in sizes from 2 1/2" to 8", in either flanged or grooved connections.

Viking Alarm, Easy Riser™, and Swing Check Valves feature a Clapper Assembly that is hinged to the hand-hole cover. The entire assembly can be removed for fast and easy maintenance, without removing the valve from the riser.

 

 

or maintenance.