When you need a Better Protection
Telecommunications Facilities
Data Processing Equipment Spaces
Control Rooms
Computer Rooms
Record / Archive Storage
Museums
Medical Equipment Rooms
Marine Shipboard Systems
Automotive
Petroleum
Transportation
Switch Gear
Rooms
Battery Rooms
High
Density/High Value Areas
Delicate
Electrical Equipment
Industrial
Control Rooms
Flammable
Liquid Storage
|
Environmentally-friendly.
The preferred fire suppression system for vital facilities that
can't afford fire-related business interruption of process controls,
automated industrial operations, robotics, etc. Active on fire, but
inert on people; non-toxic when used per NFPA Standard 2001. Safe,
no-residue protection for Class A, B and C fires. Every Kidde system
checked for design accuracy. Designed for maximum protection with
minimum hardware; less space, lower cost. UL Listed and Factory
Mutual approved.
The chemical name of the new agent was heptafluoropropane –
CF3-CHF-CF3
/ HFC-227ea - trade name of the agent, FM-200 is safe for people and
valuable assets, and validated by independent approvals.
FM-200’s mechanism is primary action physically cooling fire at the molecular level. FM-200 literally
removes heat energy from the fire to the extent that the combustion
reaction cannot sustain itself. Additionally, there is a chemical
extinguishing action contributed by FM-200. Trace amounts of free
radicals are released in a fire, ultimately inhibiting the chain
reaction of combustion.
Designed for
harsh and demanding applications; low temperature environments
(locomotives, mining equipment, unheated storage), high ceiling
structures (warehouses) or hazards requiring high concentration
inerting (flammable liquid storage, turbine enclosures). Low boiling
point and high vapor pressure mean efective suppression where other
agents fail. Ceiling heights to 25 feet. FE-13 is clean, safe and
fast acting, with no EPA restrictions.
INERGEN is a gaseous fire extinguishing agent comprised of
the naturally occurring gases nitrogen (52%), argon (40%), and
carbon dioxide (8%).
One of the most remarkable aspects of INERGEN agent is
that it removes enough oxygen from the air to extinguish fire, yet
people are still able to breathe comfortably. Another advantage of INERGEN agent is that it won’t
produce a fog, so escape routes remain visible and is nontoxic.
In fact,
actual fire performance tests have documented extinguishments in as
little as 22 seconds on Class A fires and as little as 17 seconds on
Class B fires.
Recommended
for protection of unoccupied facilities. Economical,
computer-designed and engineered; using total flooding, hand hose
line and/or local application. The most technologically advanced
CO2 fire suppression systems available. Colorless, odorless and
electrically nonconductive. Rapid cleanup equals minimal downtime.
The MicroMist
system is a self-contained, single-fluid, pre-engineered
water mist fire suppression system for total compartment protection
of machinery spaces and compartmentalized gas turbine generators.
The MicroMist has demonstrated excellent performance extinguishing
flammable liquid (Class B) fire scenarios.
Halon 1301 is a colorless, odorless, and non-toxic gas
that extinguishes a fire by chemically reacting with the combustion
process. When a fire is detected the chemical, which is stored as a
pressurized liquid, is released from the storage cylinder(s) as a
liquid and gas mixture. The liquid fraction is superheated and
flashes into the vapor phase. This hastens the "total flooding,"
with the agent rapidly distributed through-out the protected space.
When the concentration of Halon 1301 reaches its effective level
(typically between 5% - 7%), the fire is extinguished.
|
